English
русский
Español
简体中文1. The elevator is equipped with floor doors, car running direction indicators, mathematical display car, running position floor indicator, and call elevator button at each service floor station. When the elevator call button is used, press the up direction button to go upstairs, and press the direction button to go downstairs.
2. When the car arrives, the floor direction indication will show the moving direction of the car. Passengers enter the car after judging the direction they want to go and confirming that the elevator is normal. Pay attention to the closing of the door, and do not stay at the docking point between the floor door and the car door.
3. Passengers are not allowed to rely on the car door, smoking and littering in the car are not allowed, so as to keep the car clean and hygienic.
4. The driver must strictly perform the duties of the post, and the elevator shall not be away from the post during the operation of the elevator, and the fault shall be dealt with and reported in time.
5. Passenger elevators cannot be frequently used as freight elevators, and flammable and explosive products are absolutely not allowed to be shipped.
6. When an abnormal phenomenon or failure occurs in the elevator, keep calm, call the rescue phone in the car, and do not attempt to escape from the car by breaking the door without authorization.
7. There are position displays, control panels, door switch buttons, and floor selection buttons in the car. After entering the car, press the floor selection button of the desired floor. To close the car door immediately, press the door close button. The car floor position indicator shows that you have reached the floor and you can leave after the car door is opened.
8. Passengers should take good care of the elevator facilities, and are not allowed to arbitrarily press buttons or pry the door.
9. It is not allowed to run in overload, please quit actively when the staff is overloaded.
10. The driver is not allowed to use the inspection and emergency stop buttons as the call signal before starting the normal operation; it is not allowed to use the inspection speed to operate when the floor and car doors are opened; it is not allowed to open the car top trap door and safety door; It is not allowed to transport super-long objects at the inspection speed; it is not allowed to use the manual car door opening and closing as the start or stop function of the elevator; it is not allowed to change direction suddenly during operation.
